Taking measurements 

Historically loupes companies would send representatives to practices and homes across the country. Here they would take a number of measurements to build your loupes and let you try on a choice of frames and optics. 

One of the principle ways we are able to build high quality loupes at affordable prices is by providing an alternative to the historical method of taking measurements.  

Our remote modelling method has been working even more favourably since COVID restrictions have changed the way we’re living and working. Our tried and tested method of the measurements enables us to build loupes to an extremely high degree of accuracy.  

This blog post will detail the measurements that are required, how to take them and what we do with them to build your loupes.

Working Distance

This measurement gives a vertical range in which to build the loupes so that the focal point is at the correct distance from your eyes. Ideally you will need to sit in your working environment with a good upright posture and a strong core. Ensure you are not hunched over or sitting in a position that is not normal or comfortable for you. If you have worked without loupes for many years take extra consideration to ensure that you are sitting with a straight back, we want to make sure that your new loupes prevent further or future back pain and problems.

Then, holding a measuring tape between the corner of your eye and the area you are working in take a maximum and minimum reading taking consideration for larger/smaller patients or particular work you undertake that may affect your positioning. Have a photo taken of this position with the tape measure in place as in the image below. It can be sensible to remeasure this 2-3 times to make sure you are getting the same/a similar reading every time.