Purchasing a first pair of loupes can be quite complex. Magnification, frame style, preferred brand, warranty, case, comfort… the list goes on. The best addition to a loupe purchase would be a light and this too can be quite a labyrinth.

Below we have put together a blog post that will guide you through this labyrinth and shine some light into the world of head light buying.

Weight

Light units may seem lightweight whilst holding them in your hands but when they are attached to your loupe frame and you are wearing them for extended periods of time, this light can become quite uncomfortable. When trying a light on, it is important to try it with your loupes, be sure they are comfortable and that you feel you could wear them all day long. Most companies will offer a trial and this is the best way to be sure you are happy with the light.

Colour

You may hear lights being described as ‘warm’ or ‘cool,’ which refers to the colour temperature of the light unit. This is measured in a unit called Kelvin. Generally speaking, the lower the Kelvin, the warmer and more orange the light is. The higher the kelvin the cooler and bluer the light is. The colour of the light can change the way people perceive different surfaces. A warmer light gives surfaces a more ‘natural’ feel but cannot always highlight finer detail. A colder light will give detail but will make surfaces seem unnatural.

People perceive light colour differently and the best type of light would depend on personal preference and type of work being undertaken. Most users will focus more on the intensity of the beam rather than the colour.

Intensity

You may hear light intensity being measured in Lumens, LUX, Candela and other terms. Lumens describes the power of the light source and LUX is the intensity of the light source falling over a defined area. In simple terms the higher the number, the brighter the light will be. However, it is important lights are not too bright as this can damage patient’s eyes. Light units in the region of 40-60K Lux are deemed the standard.

Wireless or Wired

Batteries are forever getting smaller, more powerful and longer lasting. In recent years, we have been able to take advantage of this and develop a wireless light unit. The wireless light unit does away with the battery in your tunic and a wire over the arms of your loupes. They are comfortable to wear, less likely to get tangled and are more aesthetically pleasing. However, they are slightly heavier as the battery is on the frame – the battery is lighter though so it is not as noticeable as you would imagine. As the batteries are smaller, the burn time is not as great. To combat this, wireless units often come with two or three batteries so that at least one will always be charged.

Battery life

Most wired units would give you at least 8 hours of light meaning that you could then charge the light overnight ready for the next day. All our units come with one battery, as this is normally all that is required. Extra batteries are optional if you had an exceptionally long day or you were wanting a spare battery for an emergency. Wireless units are slightly different as the batteries are smaller and consequently will not last as long. To combat this, wireless units will come with extra batteries so there will always be at least one battery charged and ready to be used.

What is the best way to clean and care for your loupes?

In this blog post we will look at the best way to do this to ensure you maintain the quality of the loupes, the clarity of the image quality and to ensure you are complying with legislation.

Having a process like this in place will quickly become habit and will look after your loupe so that your loupes can work at looking after you and your patience

Every working distance has a focal trough or otherwise known as depth of field, this is the range that one can focus within at a specific working distance. This is usually 7-8cms above or below your optimum working distance. This depth of field usually reduces as the magnification increases. Getting the right working distance ensures you sit correctly with a good posture, if you start to lean forward or slump the image will become unclear, hence the correct working distance disciplines you to adopt the correct posture.

Facial measurement

These measurements are used to build the loupes and frames to ensure that they are ergonomically best suited for your individual face shape.

To take these measurements we need three pictures as shown below of the front and both sides of your face. The camera needs to be 30-40cm away from your face and a ruler held in the positions shown.

These photos enable us to advise on the best choice of frame and build the optics so that they are anatomically perfect.

Once we have all these measurements they can be emailed to sales@ukloupes.co.uk or WhatsApp’d to the Ukloupes account 07779442529. This remote modelling procedure has proved so successful that it enables us to offer a guaranteed fit service. When you receive your loupes, you have a 30-day trial period within which we can make any adjustments free of charge.

If you have any problems taking these photos or require some clarification, please don’t hesitate to get in touch.

Kindest regards,

UKloupes Sales Team

Marmite? Love it or hate it, it divides opinion. Choosing between flip ups and through the lens loupes (TTLs) can have the same affect. Especially for a first pair of loupes you will have probably heard fellow colleagues and class mates swear by both.

We are asked a lot “What is the difference?”. As it is such a personal choice depending on the individual’s specific needs it is very difficult to give a definitive answer. What we have done in this blog post is tried to clearly define the positives and negatives of both to give you some structure to your decision-making process.

Flip up loupes have been around for a long time and offer different benefits to that of TTL’s. Flip-ups can be mounted on an existing pair of prescription glasses, one of our frames, or a head band. The idea is the same for each – the optics are mounted on hinge system so that they can be adjusted easily and flipped up out of the way when not in use.

Advantages of Flip-Up Loupes

The loupe barrels can be flipped up out of the field of view of the user. The user can then have better facetime with their patients, clearly see computer screens, tools and charts with out the need to remove the loupes as you may have to with TTLs.

Angle of declination can be adjusted depending on the type of work being undertaken. As TTLs the optics are fixed in the frame then flip ups give a greater degree of flexibility if the user is undertaking tasks that require movement from a normal sitting position.
As flip ups require less customisation then they come with a lower price compared to TTL loupes.

Flip ups are highly adjustable and as such can be used between several people. This makes them an ideal choice of loupes to have as a training aid or in a setting where several people may be working with them.

Easy to change and replace – as flip-ups are not customised it is very easy to swap the magnification barrels for stronger/weaker ones, they are also very easy to repair as all the parts and components on them are replaceable and generic.

Disadvantages of Flip-Up Loupes

Due to the hinge mechanism on the frames and the larger optics the flip up loupes will be heavier than a pair of TTL’s. The fact that the weight of the unit sits primarily on the bridge of the frame will make the unit feel front heavy.

The field of view will be reduced as the optical barrels are sitting further away from your pupil. The slight increase in distance will mean that the working area is slightly reduced where compared to a similar level of magnification on a pair of TTLs.

Adjusting flip-up loupes often needs to be done on a regular basis to ensure a single image is achieved where as TTL’s never need adjusting once they are made.

TTL loupes are a technological step forward from flip ups. They produced the same result when working under magnification but offer a more comfortable and quality pair of loupes. The optics are mounted within the carrier lens and are built to a very high specification based on several measurements taken form the client’s eyes and head shape.

Advantages of TTL loupes

TTL loupes do not require a hinge mechanism and can be built into smaller barrels making them much lighter weight. TTL loupes have the optics built into the carrier lens which means you don’t have the frontal weight compared to a pair of flip ups. In all this makes TTLs very aesthetically pleasing.

Each pair of loupes is fully bespoke to the individual’s facial features. We take several measurements including interpupillary distance, ear/nose height, face width and working distance amongst others. This enables us to build the most ergonomically pair of loupes for the individual that will require no adjustments and enable the best possible working position.

As the barrels of TTL loupes sit much closer to the eyes then the depth and width of view through the loupes is greatly increased compared to a pair of flip up loupes.

Disadvantages of TTL Loupes:

As these loupes are personalised for individuals it is not often possible to share them with colleagues. It is also difficult to send ‘demo’ loupes as it wouldn’t always be possible to send you exact specification. If a demo paired of TTLs would be required, then we would send you a best fit but would ask if you would remember that it would be a true representation of what a bespoke pair of loupes would be like.

As TTL loupes are built to a much higher specification requiring multiple manufacturing processes the price for these loupes is higher than a pair of flip up loupes.

If you wish to increase your level of magnification in years to come this won’t be possible as the loupes and optics are bespoke/customised and cannot be easily changed. It would usually be a case of buying a new pair of loupes.

Hopefully this has provided you with some information that will facilitate your choice in what loupes you require. To Help with the decision-making process, at UKloupes we can send some demo loupes for you to try on a 10 day risk-free trial period in what ever specification you would like. We also offer a 30-day money back or adjustment guarantee then means once you have your loupes from us you still have plenty of options available to you. For further information or reassurance, get in touch or take a look at what our customers have to say!

Often overlooked, dental loupes are an essential part of dentistry offering a wealth of benefits. Here are 5 reasons

1. Better Visual Acuity

   One of the many challenges in dental field is viewing the microscopic details of the teeth. Even if you boast 20:20 vision, such details require magnification, and dental loupes provide the user with vision which is far superior to that which could be achieved naturally.

2. Improved Posture & Reduced Back Pain

   It is known that dentists are at high risk of musculoskeletal pain with studies reporting 70% of dentists experiencing lower back pain & nearly a third forced into premature retirement.
   Fortunately, maintaining an ergonomic posture is easy with a good fitting set of dental loupes. They provide a magnified view of the mouth; eliminating the desire to move closer to the patient.

3. Reduced Eye Strain

   The symptoms can be unpleasant, resulting in fatigue, sore eyes and headaches. Working in the dental field, you are required to concentrate for long periods of time on the small details on the teeth. Made to measure dental loupes reduce eyestrain, magnifying all aspects of the mouth.

4. Save Time

   Enhanced magnification not only assists with your vision but also allows you to do more in less time. Allowing you to work with precision and accuracy, and at a faster pace.

5. Improved Diagnosis

   To provide your patient with the most accurate diagnosis, it is vital that you can view your working field with clear, crisp vision. As dental loupes magnify the image greatly, users can easily see details which are not visible to the naked eye.

Guide to choosing the most suitable magnification for your loupes

Loupes come in several different magnifications depending on the work being undertaken and the individual user’s preference. You will often meet a range of opinions, some people have three or four pairs of loupes with a variety of different magnifications, from their first pair of x2.5 magnification loupes at dental school to their x5.0 magnification pair of prismatic loupes they are now using for Endo work. Essentially there isn’t a right or wrong level of magnification to choose however in our opinion it’s often advisable to start with a lower level of magnification and then gradually increase to a higher level of magnification in line with specialising in your particular path in dentistry.

In this blog post we aim to provide you with some information to enable you to make the most informed choice when it comes to choosing the right magnification for you and your work.

For general day to day dentistry work most clients use 2.5-3.5x magnification. This gives a good overall field of view of the working area whilst being able to have some level of detail on specific areas. Naturally, a higher level of magnification loupes is then often purchased at a later date as a second pair of loupes or for one who is specialising in a specific line of dentistry such as Endodontics. It is important to remember than as the level of magnification increases, the field of view decreases, so there is always a balance between choosing a magnification that provides a good level of detail along with enough peripheral image to continue working in an effective and efficient way.

Below we have photographed the different levels of magnification for you to see the level of detail and field of view for each increment. You can use this infographic to help with the decision on the best choice of loupes for your work.